DI 730 II

Technical Specification
Standard Features DI 730 II 2WD
Engine
Engine Type 2105 DL Without coldstart
HP Category 30
No. of Cylinders 2
Aspiration Natural Aspiration
Bore/Stroke(mm) 105/118
Cubic Capacity (cc) 2044
Rated RPM (+/-25mm) 2100
Air cleaner wet Air Cleaner
Max Torque (Nm) @ RPM 112(+/-5%)@1300 RPM(+/-100)
Transmission
Drive 2WD
Clutch Single Clutch
Gearbox 8F+2R
Transmission Sliding Mesh
PTO
PTO (rpm) 540 rpm
PTO (actuation) Mechanical,Hand operated
Diff Lock
Diff. Lock(mechanical) No
Electrical
Battery 12V,75 AH
Alternator 12V,35 Amp
Seven pin trailer socket Yes
DCV
Auxiliary hydraulic circuit NO
No.of Spool valves NO
Steering
Steering Mechanical Steering
Tyre
Front 6*16
Rear 12.4*28
Speed(Forward)
Max Speed(Km/Hr) 29.60 @ 2000
Min Speed(Km/Hr) 2.75 @ 2000
Hydraulics
3 point linkage CAT2
Stay Bars Yes Adjustble Check Chain
Hydraulic lifting capacity 1200 kg
Brakes
Brakes Dry Disc Brake
Type of actuation Mechanical
Hand brake Yes
Others
Driver Seat Yes, Adjustable With Smv
Trailer hitch Standard Rear Toe Hook
Fuel Indicator gauge Yes
Canopy No
Registration Plate with light No
Front Toe Hook Yes
Front & rear weights Bumper Only
Drawbar Normal draw Bar
ROPS No
Safety Switch
Neutral safety switch No
P.T.O Safety switch No
Clutch Safety Switch No
Capacity (ltrs)(+/-5%) approx
Fuel tank 55
Eng Oil 6
Hyd+Tran 50.3
Dimension & Weight(+/-5%)
Gross Weight(kg) 1800
Wheel Base (mm) 1835
Total Length (mm) 3375
Total Width (mm) 1655
Height (mm) 2305
Ground Clearance (mm) min 370 (below trans. Plug)
Front Track, (mm), min.-max. 1300 (std.) & 1500
Rear Track, (mm), min.-max. 1325 (std.) 1475-1535
Turning Diameter
Without Brakes (m) 6.5 m ( R ) – 6.11 m ( L )
Turning diameter. With Brakes (m) 5.57 m ( R ) – 5.49 m ( L )