DI-60 Rx

Built Strong
Sonalika DI 60 Rx is all purpose tractor. It is robust, fuel efficient and gives optimum performance on field.

HP

60

Get a QuoteDownload Brochure
Technical Specification
Standard Features DI 60 RX 2WD/4WD
Engine
Engine Type 4100 FL with coldstart
HP Category 60
No. of Cylinders 4
Aspiration Natural Aspiration
Bore/Stroke(mm) 100/118
Cubic Capacity (cc) 3707
Rated RPM (+/-25mm) 2200
Air cleaner Dry Air Cleaner with Clogging sensor
Max Torque (Nm) @ RPM 230(+/-5%)@1200 RPM(+/-100)
Transmission
Drive 2WD/4WD
Clutch Dual Clutch
Gearbox 8F+2R
Transmission Constant mesh
PTO
PTO (rpm) 540 rpm
PTO (actuation) Mechanical,Hand operated
Diff Lock
Diff. Lock(mechanical) Yes ,Foot operated
Electrical
Battery 12V,88 AH
Alternator 12V,36Amp
Seven pin trailer socket Yes
DCV
Auxiliary hydraulic circuit 1SA+1DA
No.of Spool valves 3
Steering
Steering Power Steering
Tyre
Front 7.5×16/9.50×24
Rear 16.9×30
Speed(Forward)
Max Speed(Km/Hr) 35.10@2200
Min Speed(Km/Hr) 2.87@2200
Hydraulics
3 point linkage CAT2
Stay Bars Yes,adjustable
Hydraulic lifting capacity 2000 kg
Brakes
Brakes Oil Immeresed Brake
Type of actuation Mechanical
Hand brake Yes,Independent
Others
Canopy No
Fuel Indicator gauge Yes
Driver Seat Yes,Adjustable with safety Emblem.
Registration Plate with light Yes,E-marked
Front Toe Hook Yes
Front & rear weights Base Weight 72Kg+Front 6X31 Kg and Rear 1X34 Kg with each wheel.
Drawbar Swinging Draw Bar with Linkage crossbar.
ROPS No
Safety Switch
Neutral safety switch Yes
P.T.O Safety switch No
Clutch Safety Switch No
Capacity (ltrs)(+/-5%) approx
Fuel tank 65
Eng Oil 12.5
Hyd+Tran 58
Dimension & Weight(+/-5%)
Gross Weight(kg) 2570 (with standard ballast)/ 2980 (with standard ballast)
Wheel Base (mm) 2200/2330
Total Length (mm) 3740/4210
Total Width (mm) 1915/1980
Height (mm) 2365/2420
Ground Clearance (mm) min 370 (below steering ram cylinder)/360 (below front diff housing)
Front Track, (mm), min.-max. 1350(Std), 1460-1750/ 1425 (Std.), 1535-1985
Rear Track, (mm), min.-max. 1465(Std.), 1545-1875/ 1565 (Std.), 1637-1890
Turning Diameter
With Brakes(m) 7.97  m (R) – 7.75 m (L)/7.49 m (L) – 7.38 m (R)
Without Brakes(m) 9.52 m (R) – 9.45 m (L)/8.54 m (L) – 8.46 m (R)