DI 30 Baagban
DI 30 Baagban
For best results on small farms.
Baagban is specially designed to perform light farm and lawn tasks
HP
30
Technical Specification
| Standard Features | DI-30 Baagban 2WD |
| Engine | |
| Engine Type | 2105 DL Without Coldstart |
| HP Category | 30 |
| No. of Cylinders | 2 |
| Aspiration | Natural Aspiration |
| Bore/Stroke(mm) | 105/118 |
| Cubic Capacity (cc) | 2044 |
| Rated RPM (+/-25mm) | 2100 |
| Air cleaner | Wet air cleaner |
| Max Torque (Nm) @ RPM | 112(+/-5%)@1300 RPM(+/-100) |
| Transmission | |
| Drive | 2WD |
| Clutch | Single clutch |
| Gearbox | 8F+2R |
| Transmission | Sliding Mesh |
| PTO | |
| PTO (rpm) | 540 rpm |
| PTO (actuation) | Mechanical,Hand operated |
| Diff Lock | |
| Diff. Lock(mechanical) | No |
| Electrical | |
| Battery | 12V,70 AH |
| Alternator | 12V,33A |
| Seven pin trailer socket | Yes |
| DCV | |
| Auxiliary hydraulic circuit | No |
| No.of Spool valves | No |
| Steering | |
| Steering | Mechanical Steering |
| Tyre | |
| Front | 5X15 |
| Rear | 9.50X24 |
| Speed(Forward) | |
| Max Speed(Km/Hr) | 21.15 |
| Min Speed(Km/Hr) | 1.55 |
| Driver seat | Yes, Fixed |
| Hydraulics | |
| 3 point linkage | CAT2 |
| Stay Bars | Yes adjustble check chain |
| Hydraulic lifting capacity | 1200 KG |
| Brakes | |
| Brakes | Dry Disc Brake |
| Type of actuation | Mechanical |
| Hand brake | Yes |
| Others | |
| Driver Seat | Yes, Fixed |
| Trailer hitch | Standard rear toe hook |
| Fuel Indicator gauge | Yes |
| Canopy | No |
| Registration Plate with light | No |
| Front Toe Hook | No |
| Front & rear weights | No |
| Drawbar | Normal draw bar |
| ROPS | No |
| Safety Switch | |
| Neutral safety switch | No |
| P.T.O Safety switch | No |
| Clutch Safety Switch | No |
| Capacity (ltrs)(+/-5%) approx | |
| Fuel tank | 28.6 |
| Eng Oil | 6.95 |
| Hyd+Tran | 42.5 |
| Dimension & Weight(+/-5%) | |
| Gross Weight(kg) | 1470(without ballast) |
| Wheel Base (mm) | 1620 |
| Total Length (mm) | 2920 |
| Total Width (mm) | 1380 |
| Height (mm) | 850 |
| Ground Clearance (mm) min | 310 (below trans. Plug) |
| Front Track, (mm), min.-max. | 1175(std) |
| Rear Track, (mm), min.-max. | 1130(std),1265-1865 |
| Turning Diameter | |
| Without Brakes (m) | 6.52 ( R ) – 6.53 m ( L ) |
| With Brakes (m) | 5.52m ( R ) – 5.56 m ( L ) |
